ATR833S / P/N 833S-(Cxxx)-(Cxxx)
Operation and Installation
14
Document-Nr.: 01.142.010.71e / Revision:1.03
If no input is done for 10 seconds, the device returns to the standard
view.
2.4.5 Editing of the user-defined frequency list
The standby frequency can be stored into any entry of the user memory.
This is achieved by a long press of approx. 1,5 seconds on
MEM.
The
previous memory entry will be overwritten.
The following example stores the frequency 124.350 MHz of KONSTANZ
(EDTZ) into the user memory entry 07:
Step
Display (Example)
1. Tune in frequency:
Have frequency to be stored set as
standby frequency
1 1 8 . 2 7 5
1 2 4 . 3 5 0
2. Enter memory list:
Long
press on
MEM
in order to access
the user memory.
s a v e T o 1
1 2 4 . 3 5 0
3. Select memory position:
Selection of the decided memory
position with
VOL/SEL
s a v e T o 7
1 2 4 . 3 5 0
4. Overwrite the selected memory :
with a
press
of
MEM
the standby
frequency is stored at the selected
position.
A preceding
>
shows the successful
storage to the memory position.
M E M :
7
> 1 2 4 . 3 5 0
To exit the frequency list press
MEM
twice or wait 10 seconds until time-
out.
List entry „1“ contains the last standby frequency from the
MEM menu
