FUNGLAN KJ-168S, Operation Manual

Page: 6 / 8

iii. Maintenance:

Fill Water
Make sure the power is off. Take off the upper body, and fill
water into the transparent tank. Make sure to fill water no higher
than the “MAX” level and no lower than the “MIN” level
marked outside the tank. Then take the upper body and set it in
right place.
RIGHT WRONG
Forbid scattering water into machine’s upper body. If there is
water on the machine when taking up the upper body, you must
put the upper body vertically or aslant, place it on dry towel or
use towel to dry the machines body. Don’t make the machine
reverse laying in order to avoid the water inflowing into the
machine body and shorten its using-life.

Drain and Clean
Please change the water in time when it hasn’t been used for a
long time or is contaminated. The steps are as below:
ⅰ
Turn off the power and unplug the machine.
ⅱ
Take off the upper body.
ⅲ
. Empty the dirty water inside the tank, and clean the tank. If