background image

 

 

 

 

 

 

 

 

 

 

   FFI Tech Dept. v 09.11.06                                             Measurements in Millimeters.  1” = 25.4mm                                              10 of 11
 

 

  AGB Unitop

®

 Model 1455-3 Door Lock   

Installation Guide

Unlocking

1.  Turn profile cylinder knob or key

     until it stops to unlock.
     (approximately 1-3/4 turns).

2.  Push the lever down 45° to retract

     the top and bottom shoot-bolts,
     deadbolt and latch.

Note: In the unlocked position the handle can be

         moved up or down. Lifting the handle up
         engages the "shoot-bolts". Pushing the
         handle down will retract the latch.

1

2

Locking

1.  Lift the lever handle 45° to engage 

     the top and bottom shoot-bolts and
     throw deadbolt.

2.  Turn the profile cylinder knob

     or key until it stops to lock. 
     (approximately 1-3/4 turns).

Note: In the locked position the handle can

         be lifted up but not lowered down.
         This effectively locks the door.

2

1

6.0    Operation & Maintenance 

 

6.1   Operation 

 

 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 

6.2   Warranty 

 

Each of the Alban Giacomo spa (AGB) products is expressly warranted for a period of one 
(1) year from the date of original purchase under normal installation and use, against defects 
in material and workmanship.   

 

Not covered by the warranty: damage arising from improper use, modification, fitting or 
storage or normal wear or defects that have negligible effect on the value or operation of the 
product.  The warranty becomes void if repairs are undertaken by unauthorized persons. 
Normal environmental corrosion is not covered by warranty. 
 
AGB’s liability for any defective product is limited to the repair or replacement of said product 
at our option, and shall not include damages of any kind, whether incidental, consequential or 
otherwise. Any claim must be made according the above paragraphs and the goods must be 
returned freight free. 

 
 

Summary of Contents for AGB Unitop 1455-3












Reviews: