1 : Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as Identification (location) No. of parts in the figures.
2 : Indicates the part to start disassembling with in order to disassemble the part in column (1).
3 : Name of the part
4 : Location of the part: T=Top B=Bottom R=Right L=Left
5 : Figure Number
6 : Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
7 : Adjustment Information for Installation
(+): Refer to Deck Exploded Views for lubrication.
STEP
/LOC.
No.
START-
ING
No.
PART
REMOVAL
INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
[35]
[28]
Loading Arm S Assembly
B
DM2, DM15
(+) Refer to Alignment
Sec. Pg. 2-4-9
[36]
[35]
Loading Arm T Assembly
B
DM2, DM15
(+) Refer to Alignment
Sec. Pg. 2-4-9
[37]
[28]
M Brake T Assembly
T
DM1, DM16 *(P-6)
[38]
[38]
M Brake S Assembly
T
DM1, DM16 *(P-7)
[39]
[38]
Tension Lever Sub
Assembly
T
DM1, DM16
*(P-8), (C-9)
[40]
[39]
T Lever Holder
T
DM1, DM16 *(L-5)
[41]
[2]
M Gear
T
DM1, DM16 (C-7)
[42]
[37]
Reel T
T
DM1, DM16
[43]
[39]
Reel S
T
DM1, DM16
[44]
[43]
Moving Guide S
Preparation
T
DM1, DM17
(S-17), Slide Holder S
[45]
[36]
Moving Guide T
Preparation
T
DM1, DM17
(S-18), Slide Holder T
[46]
[20]
TG Post Assembly
T
DM1, DM17 *(L-3)
[47]
[29]
Rack Assembly
R
DM18
(+) Refer to Alignment
Sec. Pg. 2-4-10
[48]
[47]
F Door Opener A
R
DM18
*(P-9)
[49]
[49]
Cleaner Lever Assembly
T
DM1,DM6
[50]
[49]
CL Post
T
DM1,DM6
*(L-6)
↓
➀
↓
➁
↓
➂
↓
➃
↓
➄
↓
➅
↓
➆
2-4-2
H85G0DA
