FUNAI T3A-A8182DB, Service Manual

Page: 22 / 91

1-10-2 E3B40FW
The status displayed in *2 is as shown below.
Fig. e: VFD Display during update
When the TV screen displays "Firmware
Updating... XX% Complete," the VFD will indicate
"XX"%.
7. When update is complete, the unit will shut off
automatically.
8. If an error occurred during updating, the TV screen
will display Fig. f.
Fig. f: TV Display when completing update with error
Fig. h: VFD Display when completing update with error
In this case, all button operations will be invalid
except [STANDBY-ON] button.
9. Press [STANDBY-ON] button to turn the power off
and press [STANDBY-ON] button again to turn the
power back on and finish updating.
3. How to Verify the Firmware
Version
1. Turn the power on and remove the disc in the tray.
2. To switch the HDD & DVD into HDD mode, press
[HDD] on the remote control unit.
3. To put the HDD & DVD into version display mode,
press [VARIABLE SKIP] and [1], [2], [3] buttons on
the remote control unit in that order within 3
seconds. Fig. i appears on the TV screen.
Fig. i: Firmware version display
Effective buttons in this mode are the following...
Display Status
EXECUTING
Loading F/W from Update Disc or
writing to Flash memory
ERROR Error during Flash memory writing
FILE ERROR Check SAM error in F/W file
READ ERROR Error during F/W file reading
DISC UPDATE
PLEASE PUSH POWER BUTTON
TARGET: B/E
STATUS: ERROR
*FIRMWARE version will differ depending on the
model. Fig. f is an example.
Display Contents
MODEL NAME Product number
BE Ver. Firmware B/E version
FE Ver. Application F/E version
Sub Micon Ver.
Sub Microcontroller firmware
version
REGION Region code of playable DVD disc
CPRM KEY
NO.
CPRM key number
HDD MODEL
HDD serial number and capacity
(GByte)
DivX Ver. Version number of DivX file systems
LD
ADJUSTMENT LD adjustment progress (done: OK/
not done: --)
DISC
ADJUSTMENT Factory adjustment progress (done:
OK/not done: --)
Buttons Operations
POWER
Power off to release from this
mode.
SETUP
Version display disappears and
SETUP screen appears.
TOP MENU
Version display disappears and
TOP MENU screen appears.
TIMER PROG.
Version display disappears and
TIMER PROGRAMMING screen
appears.
DUBBING
MENU Version display disappears and
DUBBING screen appears.
Others
While displaying version and
normal operation.
******* part will differ depending on the model.
Fig. i is an example.
VERSION INFORMATION
E3B40ED
T3*****B2S-****
R35_***_***
T3***TTP
2
(0x***)
***********(***GByte)
***
OK
OK
Model Name :
BE Ver. :
FE Ver :
Sub Micon Ver. :
REGION:
CPRM KEY NO:
HDD MODEL:
DivX Ver.:
LD ADJUSTMENT:
DISC ADJUSTMENT: