7.
When you are finished recording, press the STOP button (#10). Wait for the
recorder to complete ‘WRITING TO DISC’.
8.
Before finalizing your disc, you may want to check how much space is used
and determine if there’s room to add more.
Press the SETUP button (middle of remote, #3)
Next use the directional arrows in the middle of remote to select
TITLE MENU (press OK to select)
Here you can see what’s been recorded and the length of time used.
If you have room and wish to add more from another tape, simply
repeat steps 4-6.
To exit the TITLE MENU page, press the RETURN button (#4).
9.
Once you’re finished, you will need to FINALIZE your disc so that you can
then play it in other devices. If you don’t FINALIZE your disc, it will NOT play
back anywhere else! However, be aware that once you do FINALIZE the disc
you cannot add anything else if you’re using a DVD-R disc.
To FINALIZE:
Press SETUP BUTTON (#3),
Select DVD MENU on screen
Select FINALIZE and at prompt select YES. The finalizing will begin and
may take a few minutes.
10.
When your disc is finished finalizing, use the OPEN TRAY/EJECT (#2) button
to remove your disc, then press the VCR button(#5) and the OPEN
TRAY/EJECT (#2) button to eject the VHS tape.
11.
Turn off both the recorder and monitor using the respective remotes by
pressing the POWER buttons (#1).
