FUNAI MFV260C Owner'S Manual Download Page 2

– 2 –

EN

INSTALL LOCATION

For safety and optimum performance of your VCP:

• Install the VCP in a horizontal and stable position.

Do not place anything directly on top of the VCP.
Do not place the VCP directly on top of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid
places. Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes on the sides of the VCP. Avoid locations
subject to strong vibration or strong magnetic fields.

AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting

it from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your VCP, unplug

the power cord immediately and take the unit to our
Authorized Service Center for servicing.

• Do not put your fingers or objects into the VCP

cassette holder.

MOISTURE CONDENSATION WARNING

Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. Do not use the VCP at least for 2
hours until its inside is dry.

FCC WARNING

This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment
may cause harmful interference unless the
modifications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.

PRECAUTIONS

IMPORTANT COPYRIGHT
INFORMATION

Unauthorized recording or use of broadcast
television programming, video tape, film or other
copyrighted material may violate applicable copyright
laws. We assume no responsibility for the
unauthorized duplication, use, or other acts which
infringe upon the rights of copyright owners.

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable

and can be reused. Please dispose of any materials

in accordance with your local recycling regulations.

Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.

Note to the Cable TV System Installer: 

This reminder is provided to call the Cable TV
system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines
for proper grounding – in particular, specifying that
the cable ground shall be connected to the
grounding system of the building, as close to the

CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE

PRECAUTIONS

Summary of Contents for MFV260C









Reviews: