EN
11
SETUP FOR USE
You need to set the followings to use the unit appropriately
for the first time you turn on the unit.
1
Press
Q
to turn on the unit.
2
Press
repeatedly to select the menu language you
3
Press
to select the country you want, then press
.
4
Press
to select the region you want, then press
.
• Scan confirmation menu will appear.
5
Press
to start scanning.
6
Press
to select the location, then press
If you select the country except
, you can skip Step 4.
DTV
ATV
OK
Initial Setup
Initial Setup
Please select your language.
English
Español
Deutsch
Dansk
Česky
Български
Ελληνικά
Select
OK
Skip
MENU
OK
MENU
BACK
Initial Setup
Please select your country.
Austria
Belgium
Bulgaria
Czech Republic
France
Germany
Greece
Select
OK
Back
Skip
Initial Setup
• If you press
, you can skip to step 6.
• If you press
during DTV channel scanning, this operation
will be stopped and ATV channel scanning will start automatically.
• If you press
during ATV channel scanning, this operation
will be stopped and the lowest memorised channel will be
displayed.
• When no channel is registered, retry confirmation menu will
appear.
• Selecting
reduces the backlight brightness for power
saving. When “Initial Setup” is completed, you cannot change the
location setting unless you restore this unit to “Factory Reset”
(p. 27) and that restarts all over again such as channel scanning.
• If you select
, the settings of picture and sound quality
you adjusted will not be memorized after you turn off the unit.
OK
Initial Setup
Please select your location.
Retailstore
at Home
Select
OK
Initial Setup
