background image

LCD TV

chassis FL10.2

SERVICE MANUAL

Contents

26”

LC260SS1

SYLVANIA LIMITED

26”

LC260EM1

EMERSON

26”

26MF330B/F7 MAGNAVOX

© 2010 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, 
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written 
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto 
is strictly prohibited.  

Information in this document is subject to change without notice. Funai reserves the right to change the content 
herein without the obligation to notify any person or organization of such changes.  

 with the 

 design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way 

without the express written consent of Funai. All other trademarks used herein remain the exclusive property of 
their respective owners. Nothing contained in this manual should be construed as granting, by implication or 
otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any 
other content in this manual is strictly prohibited.  Funai shall aggressively enforce its intellectual property rights 
to the fullest extent of the law.

A01A1/A4/A0UH

100419

Summary of Contents for Emerson LC260EM1









































































Reviews: