FUNAI DPVR-4605, Service Manual

Page: 72 / 102

2-4-1 H9500DA
DISASSEMBLY/ASSEMBLY PROCEDURES
OF DECK MECHANISM
Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer to
CABINET DISASSEMBLY INSTRUCTIONS on page 1-6-1.)
All the following procedures, including those for adjustment and replacement of parts, should be done in Eject
mode; see the positions of [44] and [45] in Fig. DM1 on page 2-4-3. When reassembling, follow the steps in reverse
order.
STEP
/LOC.
No.
START-
ING
No.
PART
REMOVAL INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
[1] [1] Guide Holder A T DM3 2(S-1)
[2] [1] Cassette Holder Assembly T DM4
[3] [2] Slider (SP) T DM5 *(L-1)
[4] [2] Slider (TU) T DM5 *(L-2)
[5] [4] Lock Lever T DM5 *(L-3),*(P-1)
[6] [2] Cassette Plate T DM5
[7] [7] Cylinder Assembly T DM1,DM6 Desolder, 3(S-2)
[8] [8] Loading Motor Assembly T DM1,DM7
Desolder, LDG Belt,
2(S-3)
[9] [9] AC Head Assembly T DM1,DM7 (S-4)
[10] [2] Tape Guide Arm Assembly T DM1,DM8 *(P-2)
[11] [10] C Door Opener T DM1,DM8 *(L-4)
[12] [11] Pinch Arm (B) T DM1,DM8 *(P-3)
[13] [12] Pinch Arm Assembly T DM1,DM8
[14] [14] FE Head Assembly T DM1,DM9 (S-5)
[15] [15] Prism T DM1,DM9 (S-6)
[16] [2] Slider Shaft T DM10 *(L-5)
[17] [16] C Drive Lever (SP) T DM10
[18] [16] C Drive Lever (TU) T DM10 (S-7),*(P-4)
[19] [19] Capstan Motor B DM2,DM11 3(S-8), Cap Belt
[20]
[20] Clutch Assembly (HI) B DM2,DM12 (C-1)
[21] [20]
Center Gear B DM12
[22] [22] F Brake Assembly (HI) B DM2,DM12 *(L-6)
[23] [22] Worm Holder B DM2,DM13 (S-9),*(L-7),*(L-8)
[24] [22]
Pulley Assembly (HI) B DM2,DM13
[25]
[25] Mode Gear B DM2,DM13 (C-2)
[26]
[20],[25]
Mode Lever (HI) B DM2,DM13 (C-3)
[27]
[22],[23],
[26]
Cam Gear (A) (HI) B DM2,DM13 (C-4)
(+)Refer to Alignment
Sec.Pg.2-4-8
[28] [26] TR Gear C B DM2,DM13 (C-5)
[29] [28] TR Gear Spring B DM13
[30] [29] TR Gear A/B B DM13
[31] [31] FF Arm (HI) B DM1,DM13
[32] [26] Idler Assembly (HI) B DM1,DM14 *(L-9)
[33] [26] BT Arm B DM2,DM14 *(P-5)