1-2
LC10P(A23FAEP)EA
1. VCOM Adjustment
Preparation:
Change the Panel Code of the LED32-H9000M from
140 to 117 since the LVDS Format of LED32-H900M
is “JEIDA” and LVDS Format of 32FL552/10 is
“VESA”.
Procedure:
1. Connect the connector (LVDS OUT) on the Digital
Main CBA Unit of the LED32-H9000M (2010
Model) to the connector (LVDS IN) on the T-CON
CBA of 32FL552/10 with long LVDS wire.
2. Set the color analyzer at the zero point calibration
and bring the optical receptor pointing at the
center of the LCD-Panel of this LCD TV.
Note:
The optical receptor must be set
perpendicularly to the LCD Panel surface.
3. Turn on the power of LED32-H9000M.
4. Turn on the power of 32FL552/10.
5. Enter the service mode through LED32-H9000M.
6. Enter the service mode through 32FL552/10 and
press [2] button on the remote control unit. The
Flicker pattern appears in the screen.
Adjust the variable resistor on the T-CON CBA so
that the color analyzer value becomes minimum.
7. To cancel or to exit from the VCOM Adjustment,
press [BACK] button.
Connector (LVDS OUT) on
the Digital Main CBA Unit
Connector (LVDS IN) on the T-CON CBA
LED32-H9000M (2010 Model)
32FL552/10
Color Analyzer
To avoid interference from ambient
light, this adjustment should be
performed in a dark room.
Perpendicularity
L = 3 cm