Fun Generation LED Pot 12x1W RGBW, User Manual, Page: 31 / 48

Press [MODE] or [UP] | [DOWN] repeatedly until the display shows ‘SLAv’ . The device is now
working in slave mode, i.e. it will exactly copy the movement of the controlling master device,
correct wiring provided.
Press [MODE] or [UP] | [DOWN] repeatedly until the display shows ‘Colr’ . All LEDs light with full
intensity. Press [SETUP] to then select with [UP] | [DOWN] the intensity of the red LEDs between
‘r.000’ (off) and ‘r.255’ (full). Press [SETUP] to then select with [UP] | [DOWN] the intensity of the
green LEDs between ‘g.000’ (off) and ‘g.255’ (full). Press [SETUP] to then select with [UP] |
[DOWN] the intensity of the blue LEDs between ‘b.000’ (off) and ‘b.255’ (full). Press [SETUP] to
then select with [UP] | [DOWN] the intensity of the white LEDs between ‘u.000’ (off) and ‘u.255’
(full).
Press [MODE] or [UP] | [DOWN] repeatedly until the display shows ‘Soud’ . The device now
shows a sound-controlled colour sequence. Press [SETUP] to then select with [UP] | [DOWN] the
sensitivity of the built-in microphone for sound control between ‘SU.00’ (low) and ‘SU.31’
(high).
Slave mode
Color mode
Sound mode
Operating
LED Pot 12×1W RGBW
31