Fumex FF 100 Series, Manual

Page: 6 / 12

6
FUMEX FF 100
7 8 9 1 5 3 2 4 6
Manual
3.3 Areas of Use
Fan FF 100 is intended for evacuation of dust and/or
gases.
3.4 Design
See Fig. 2 .
1. Inlet
2. Impeller
3. Fan housing
4. Handle
5. Outlet
6. Control panel
7. Power switch/Potentiometer
8. Power cord connector
9. Power cord
3.5 Function
FF 100 is a plug-in fan that is equipped with outgoing
air evacuation. The fan is available for both 115 V and
230 V.
Air is sucked via the inlet (1) through the impeller (2)
and sent out via the outlet (5).
On the control panel (6) there is a power switch/po-
tentiometer (7) that adjusts the airflow. The handle (4)
on the fan housing can be used for lifting the device.
The fan is equipped with an overload protecition. If
the overload protection is triggered, reset is done by
unplugging the fan and waiting until the temperature of
the motor has fallen.
Various accessories are available, including: various
classes/types/sizes of filters; suction nozzles and hoods,
portable trolley with rotating and lockable wheels,
adapter for exhaust air and equipment for fixed moun-
ting. Refer to Chapter
11 Accessories & Spare Parts.
Fig. 2