L1
(L3)
L2
L3
(L1)
W2
U1
U2
V1
V2
W1
Y
W2
U2
V2
U1
V1
W1
L1
(L3)
L2
L3
(L1)
Z2
U1
U2
Z1
L1
N
Z2
U1
U2
Z1
L1
N
9.4 Exploded-view drawing
1.
Motor
2.
Impeller
3.
Fan housing
4.
Motor shield
5.
Temperature barrier, cooling panel
6.
Temperature barrier, housing
7.
Stand
8.
Temperature barrier, fasteners
9.5 Material specification
See
for reference.
• Fan housing (3), motor shield (4) and stand (7) are
made of stainless steel – 1.4301.
• Impeller (7) is made of 1.4301 stainless steel using
stainless steel fasteners.
• Temperature barrier, cooling panel (5) and tempera-
ture barrier, housing (6) are made of cast aluminium.
• Screws for attaching the motor (not on drawing) are
made of galvanised steel.
• Fasteners (not on drawing) are made of stainless steel.
• For execution of the seals, sealant and sealing tape
(e.g. EPDM) have been used.
A complete list of the components and materials used
can be obtained on request from the manufacturer.
Fig. 8
9.3 Circuit diagram, electronics
3-phase alternating current:
1-phase alternating current:
(lower voltage D connection)
(higher voltage Y connection)
Run capacitor
(clockwise rotation)
Run capacitor
(anti-clockwise rotation)
10 Spare Parts
When ordering a spare part, always specify the fan type
and size, as well as the number shown in
.
Verkstadsvägen 2, 93161 Skellefteå, Sweden • Tel.: +46 910-361 80 • Fax: +46 910-130 22 • E-mail: [email protected]
www.fumex.com
EXTRACTION ARMS
·
VEHICLE EXHAUST EXTRACTION
·
FANS
·
FILTERS
·
CURTAINS
·
CONTROLS
Summary of Contents for C 600HT
Page 1: ...C 600HT Manual...
