Step 8
9
Step 7
G — Leg Cable
H — Power Cable
F
HS
M1
M2
“G “
“F “
“G “
F — Memory Handset
1
2
3
4
M
G — Leg Cable
G — Leg Cable
H — Power Cable
Remi
handset
LED Display
Up/Down
Presets
M Buttom
10
Setup
Initial calibration
Before you start using your desk normally, you’ll need to get all the parts synced. Don’t worry — it’s easy.
With Memory Preset Handset
1.
Press and hold the DOWN button until the display reads RST. Release.
2.
Press and hold the DOWN button again, this time until the desk first lowers slightly, then rises slightly, and finally stops. Release
the DOWN button.
3.
You can now use your desk. See page 2 for tips on making the most of your Memory Preset Handset.
Setting memory presets
1.
Adjust the desk to the desired height.
2.
Press M (the display will show S -).
3.
Press a number 1 – 4.
4.
Pressing that number will return your desk to the programmed height. By default, the desk will continue to move on its own
once you’ve activated the preset, though pressing any other button will stop this movement. If you prefer to change this behav-
ior, please refer to “Toggle between One Touch and Constant Touch Presets” on page 4.
