Fullwood M2erlin Operating Instructions For Safe Use Download Page 72

Page: 72 / 81

Ref / Pt.No: 294130

Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date: 24-Mar-17

294130

Page 72 of 81

error

BUCKET ERROR

Bucket system has problems
reaching Bucket or Park
position.

No Data

error

IDENTIFICATION
ERROR

Multiple cows in crate not
identified in time.

Broken antenna /
broken ID circuit
board / wrong
configuration.

The system has been
unable to identify X
animals in a row.

Verify/exchange antenna
(wiring) / verify / exchange
ID circuit board / verify
power supply to ID circuit
board.

error

DATABASE
ERROR

Cow separation, maximum no.
of animals with unknown tags
reached.

No Data

error

AIR PRESSURE

Air pressure switch is disabled.

An error will be
generated, all
activities will be
stopped and Merlin
will go into off-line
mode.

The input activated by
the air pressure
monitoring unit is
deactivated.

Check air pressure and
reset alarm.

error

LIGHTNING
PROTECTION

Lightning protection input is
disabled.

An error will be
generated, all
activities will be
stopped and Merlin
will go into off-line
mode.

The input activated by
the air pressure
monitoring unit is
deactivated.

Check lightning protection
and reset alarm.

error

NO COW
TIMEOUT

No cow being milked for longer
than 1 hour without Merlin being
off-line or in pause (Adjustable
in Crystal 2.7).

An error will be
generated and Merlin
will go into pause
mode.

No cow alarm setting
has expired.

Check the system and
reset alarm.

warning

CRYSTALAB
_ERROR

The crystalab has produced
errors which aren't expected
every milking, if this continues
every milking Crystalab is
probably broken.

Info messages are
generated, System
will continue milking.

The crystalab has
produced errors which
aren't expected every
milking, if this continues
every milking Crystalab
is probably broken.

Check CrystaLab.

error

MILKPUMP
_INVERTER

The milk pump inverter is in
error and not working.

An error will be
generated, all
activities will be
stopped and Merlin

The input activated by
the milk pump inverter is
deactivated.

Check milk pump inverter
and reset alarm.

Summary of Contents for M2erlin


















































































Search results

Summary of Contents for M2erlin

Reviews:

Related manuals for M2erlin

Brands by name

Popular brands

Fullwood M2erlin, Operating Instructions For Safe Use

Search results

Summary of Contents for M2erlin

Reviews:

Related manuals for M2erlin

Brands by name

Popular brands