- 16 -
Appendix:
PX series monitoring platform instructions
1. Software installation:
Download files from Carspa official website on location www.fullwat.com:
PX Monitoring System V1.1.exe,
As below:
2. RS485 Isolated converter driver installation
(This step can be ignored if it has already installed):
If it is a converter with our company, please go to our
website to download, Or, find the following figure from
RS485 isolation converte: CDM21224_Setup.exe file,
double click to install.
3. Login monitoring platform:
After confirming that product is connected to the RS485
isolation converter and PC, click: Start - All Programs - PX
Monitoring System V1.1, the interface is as follows:
After startup, login monitoring interface is as follows:
Double click
to
install, enter the interface as follows:
Fill in the user name and company
name, click “Next” to enter following,
Click “Next” to enter following picture.
Click “Change...” to confirm the installation
path which is recommended to default.
Then the following interface will appear.
Click “Next” until installation is completed
Double click “°” to install, enter the
interface as follows:
Select the serial port number “ComNum” corresponding
to the RS485 converter, click to open the serial port button
“OpenCom”, exit the system, click “Exit” or the upper right
corner “X”, the operation monitoring data interface is as
shown below:
