C 2015 FMP Inc. All Rights Reserved
Deja’Vibe
MDV-3
Warning! Do not use any voltage other than 18VDC.
Your MDV-3 comes with (USA, Canada, & Japan only!) the finest power supply
available....the Fulltone FPS-3 18VDC power supply. You may
only
use a 18 volt DC supply offering at least 100ma. of current, and using a
standard 2.1mm x 5.5mm barrel connector configured Center-Negative.The symbol for “Center Negative” is the following:
If you use a pedalboard Power supply, make sure to use one that is “Regulated” and has “Isolated outputs” (for example: the Voodoo Lab
PedalPower2) so that exactly 18.0 volts DC is supplied. If you use a non-regulated 18VDC power supply, the unit’s bulb will either be brighter
or dimmer than is recommended and will not perform correctly and may be noisy.
Light Source Trimmer control:
WARNING!
This trimmer allows you to fine-tune the amount of current that gets to the light bulb thus adjusting
the amount of pitch-bend Vibrato and Phasing.This is set at our shop and
should not be touched
but (if need be) should only be adjusted
by someone who understands the nature of the circuit and how the Lightbulb affects the overall sound. The Trimmer is accessible by removing
the four screws holding the rubber feet and removing the bottomplate. Use a small slotted or Phillips-head screw driver to turn the Trimmer slightly
Counter Clock-Wise (CCW) to DECREASE bulb brightness
and the Phase swoosh.
Turn slightly CW to INCREASE bulb brightness
and “Phase Swoosh.” You have to use your ears, but our optimal setting is marked on the trimmer should you want to return to the factory setting.
(Diagram 1)
(Diagram 2)
Treadle Adjustment:
The Treadle is the gas-pedal-looking pad allowing changing of the speed with your foot. Fulltone Treadles (unlike others)
are fully adjustable to either move easily or with more resistance depending on how tight the Nylok Nut on the treadle axle is set. (see Diagram 2)
To Loosen the feel of your treadle, loosen the Nylok Nut a bit. To tighten the feel of the treadle, tighten it a bit.
WARNING!
This nut must be set
firm enough so that the treadle stays put and does not fall down on its own, which would result in an unintended change in your pedal’s speed!
Warranty:
Fulltone products carry a Limited 5 year Warranty to the original owner with proof of purchase the product was bought from an Authorized Fulltone Dealer.
There is no need to register your product, simply keep a copy of your original sales receipt. The Warranty covers failure due to manufacturing errors only and is void if
a mod or repair is attempted by anyone other than Fulltone (or an Authorized Fulltone Repairman) and/or if we deem that any operator-caused abuse or damage has
occurred. Things that would cause voiding of the Warranty would include: the use of an incorrect power supply, water damage, physical abuse, etc. If you are having
a technical issue please do not call. Instead, email [email protected] to troubleshoot the problem and (only after troubleshooting) for the scheduling of your repair.
After we have decided that a repair is necessary, we will email you an Acrobat PDF copy of our Return Authorization Form. (RA Form) You then print it out, fill out all
the information, and include it in the box with the effect you are sending. Fulltone Musical Products Inc. is not responsible for and injuries and/or damages related to the
use of our products. The Customer is responsible for all shipping costs. Thank you for buying the Fulltone Mini-Deja’Vibe 3!
Fulltone
Musical
Products
Inc.
11018 Washington Blvd. Culver City, CA 90232
for
more
info
and
expanded
information/videos
go
to
fulltone.com
and
youtube.com/fulltone
For
sales
related
questions
For
repair/Technical
related
questions
