Page 5
2000 FMP Inc. All Rights Reserved
Heavy Flanging:
is best achieved with a slow to
medium (CCW)
Rate
settings, with High (full CW)
Depth
and
Mix
settings. It may be necessary to
reduce (CCW) the
Volume Adj
. settings unless a
significant level increase is desired.
Tip: place a good overdrive/distortion pedal
before the Choralflange to experience amazingly
thick Flange sounds!
Heavy Flanging
Rotating “Leslie” Speaker:
sounds can be
simulated with a little tweaking. The
Mix
and
Depth
settings should be set low (CCW) to keep
the effect from becoming overbearing.
This sounds great in both mono and stereo
operation. You may need to increase the
Volume
Adj.
settings (CW) to compensate for the lower
levels caused by the reduced
Mix
and
Depth
.
You can get some wild over the top sounds
(popularized by Michael Landau) by slightly
increasing the
Mix
and
Depth
to around 12
‘O’clock, and try lowering the
Rate
to about
11’O’clock.
Rotating Speaker
