5
How to Assemble and Operate the Vacuum
Fig. 1
How to Assemble and Operate the Vacuum
The vacuum, hose, wand and accessories are packed separately.
1. Push the hose cuff into the hose inlet on the top of the bag compartment
until it clicks into place (Fig. 1).
How to Extend the Wand
Press the wand extension button and push the wand away from you to
extend it to the desired length.
On/Off Switch
1. To turn the vacuum on, push the power pedal on the top of the vacuum.
2. To turn the vacuum off, push the pedal again.
Full Bag Indicator
1. If the full bag indicator appears, change the vacuum bag.
2. If the full bag indicator appears, but the vacuum bag is not full, check the
hose for a clog.
NOTE: When cleaning with a tool (dusting brush, upholstery tool or crevice
tool), the full bag indicator may appear. In this case, continue
cleaning, as the indicator will likely go off once the tools are no
longer in use.
Variable Speed Control
To adjust the motor power, slide the variable speed control on the canister
body to the desired motor speed.
Suction Control
To adjust the suction level, slide the suction control switch on the handle to
reach the desired level of suction.
