FullSpeed TinyLeader Brushless Whoop
全速电子
http://www.fullspeedrc.com/
第 3 页
into the receiver status indicator from the rapid flash to slow flash.
3, the remote control manually out of the frequency interface, then
the receiver green light becomes bright. Indicates that the signal
receiver is successful.
DSM receiver:
1. Connet the receiver to FC and run the BF.Choose the correct port
and type of your receiver on the flight controller.
2. Type: set spektrum_sat_bind=9 in CLI then type ' save'.
3. Disconnect the power and repower. The light on the receiver will
flash quickly which means
it's on binding mode.
4. Turn on the radio and select bind mode. Wait a moment.It
means bind successfully if the light on receiver keeps brighting.
5. After binding. Type: set spektrum_sat_bind=0 and type 'save' to
quit the binding mode.
