Software Connection
1.
Make sure machine is on and that the home screen is
loaded.
2. Look at the blue line and type it into the web browser.
3. Hit enter and open RetinaEngrave V3.
1. Connect to Software
Type in the IP address found on the
touchscreen into your web browser
(Google Chrome Suggested).
2. Create or Import Design
Create your design within Retina
Engrave V3 or Import a file from
another design software.
3. Place Material
Place your material into your
laser bed workspace.
5. Align Material to
Engraving Area
Using either the perimeter tool or camera
function (see camera features) align your
design on the appropriate area of your
material.
6. Adjust Object Properties
Using the Properties Manager Windows,
adjust your Vector or Raster settings for
your cut, mark or engraving.
7. Run Job
Double check your safety
precautions and accessories
and press the “Play” button
to start the job.
Project Workflow
Here is a flow chart to get you started on your first project. For more details refer to your user
manual or the RetinaEngrave guide.
4
4. Focus Lens
Each machine focuses itself
differently. Refer to the manuals
focusing section for more
information.
3.
Connect Directly to Computer: This should only be done if the previous two options are not possible.
Note: The location of the ethernet port varies on computer modes.
