4
5.4
Control Panel Button Functions
On/Off Button
Pressing the On/Off button on the control panel should cause the
machine to start running and the orange light on the machine control
panel should turn ON. Pressing the power button again should cause
the machine to stop running and the orange indicator light on the
machine control panel should turn OFF.
Flow+ Button
Press this button when the machine is running to increase the fan
speed, the number on digital display increases in multiples of 10, the
maximum number is 100 which means the machine is running in full
speed.
Flow Button
Press this button when the machine is running, the number on digital
display decreases in multiples of 10.
Proper Fan Speed
The fan speed should be set according to the actual requirements to
remove all smoke without creating too much of a vacuum. During laser
cutting, the laser machine should not fill up with smoke. If there is
lingering smoke during cutting increase the fan speed. Too high a
setting may cause the work piece to lift up and be pulled toward the
vacuum created. In addition, too high a fan speed
increases the power consumption as well as the noise level.
Time Set Button
Full Spectrum Laser FSL100 User Manual, 2016, Rev.A
