DIGITAL THERMOSTAT WITH
EVENT SCHEDULE
R
T607EPL
V03-02T
-16701
5. INDICATIONS AND KEYS
1. DESCRIPTION
Digital temperature controller and indicator combined with a time scheduler which allows the user to
configure up to eight daily events, with programmable start and end time, which may be daily, weekly or
split into business days and weekends. It allows the user to activate the load manually even out of the
events. In addition to that, it offers parameters for recirculation and protection of water heaters. With the
sensor disabled it works as a time scheduler only. It includes serial communication for connection to
Sitrad.
2. SAFETY RECOMMENDATIONS
- Check the controller for correct fastening;
- Make sure that the power supply is off and that it is not turned on during the controller installation;
- Read the present manual before installing and using the controller;
- Use adequate Personal Protective Equipmenet (PPE);
- For application at sites subject to water spills, such as refrigerated counters, install the protecting vinyl
supplied with the controller;
- For protection under more critical conditions, we recommend the Ecase cover, which we make
available as an optional item (sold separately);
- The installation procedures should be performed by a qualified technician.
3. APPLICATIONS
• Air Conditioning
• Water heaters
• Displays with static coils
• Defrost control
• Ovens, injection machines
• All processes that require time scheduling
evolution
RT-607
e
plus
V
er
.03
(*) Acceptable variation in relation to the rated voltage.
(**) This device can measure and control temperatures of up to 200°C when used in conjunction with a model SB59
silicon sensor cable (sold separately)
Note:
Sensor cable length can be increased to up to 200 meters by the user by using a PP 2 x 24 AWG cable.
4. TECHNICAL SPECIFICATIONS
Control temperature
-50 to 105ºC (-58 to 221°F)(**)
Electric supply
RT-607E plus:
115 or 230 Vac ±10%(*) (50/60 Hz)
RT-607EL plus:
12 or 24 Vac/dc +10%(*)
Operating temperature
0 to 50 ºC / 32 to 122°F
Operating humidity
10 to 90% RH (no condensation)
Dimensions (mm)
76 x 34 x 77 mm (WxHxD)
Maximum current/power per output
THERM -
Thermostat control output:
16(12)A 250Vac 2HP
EVENT -
Event schedule activation output:
10A / 240Vac ¼ HP
Dimensions for cutting – to fasten
the instrument
71 ± 0,5 x 29 ± 0,5 mm (see image V)
Set key
Quick access
menu key (Flatec)
Functions lock indication LED
Temperature unit indication LED
Increase key
Decrease key
Cooling indication LED
Heating indication LED
Event schedule indicator LED
RT-607
e
plus
Control functions off indication LED
6. WIRING DIAGRAM
6.1. Identifications (see Images I to IV)
-
Image I:
RT-607E plus , supplied at 115 Vac.
-
Image II:
RT-607E plus, supplied at 230 Vac.
- Image III:
RT-607EL plus, supplied at 12 Vac/dc.
- Image IV:
RT-607EL plus, supplied at 24Vac/dc.
6.2. Temperature sensor connection
- Connect the sensor wires to terminals ‘1 and 2’: the polarity is not relevant.
- Length of the sensor cables can be increased by user himself to up to 200 meters, using a PP 2x24
AWG cable.
Event
Schedule
Control
Functions
Shutdown
Functions
Lock
Serial
programming
Protection
level
IP 65
FRONT
Supervisory
system
Minimum interval between events
10 minutes
IMPORTANT
INSTRUMENTS IN THE EVOLUTION SERIES HAVE TWO DIFFERENT TERMINAL SIZES, BUT BOTH ARE
COMPATIBLE WITH THE SCREWDRIVER 2.0mm. USING THE APPROPRIATE TOOLS DURING INSTALLATION
ENSURES A LONGER LIFE AND THE PROPER OPERATION OF THE PRODUCTS.
RT-607
e
plus
RT-607
e
plus
Approximate consumption
0.7 VA
Have this manual in the palm of
your hand by
FG Finder
application.
1
5 6 7 8
2 3 4
9
10 11 12 13 14 15 16 17
A
B
SITRAD
S1
D1
E
V
E
N
T
TH
E
R
M
Power supply
12Vac/dc
0
1
5 6 7 8
2 3 4
9
10 11 12 13 14 15 16 17
A
B
SITRAD
S1
D1
E
V
E
N
T
TH
E
R
M
Power supply
24Vac/dc
0
Image I: RT-607E plus - 115Vac
Image III: RT-607EL plus - 12Vac/dc
Image II: RT-607E plus - 230 Vac
Image IV: RT-607EL plus - 24Vac/dc
1
5 6 7 8
2 3 4
9
10 11 12 13 14 15 16 17
A
B
SITRAD
S1
D1
115 Vac
E
V
E
N
T
TH
E
R
M
1
5 6 7 8
2 3 4
9
10 11 12 13 14 15 16 17
A
B
SITRAD
S1
D1
230 Vac
E
V
E
N
T
TH
E
R
M
Surge Protective Device (SPD) (sold separately)
W i r i n g d i a g r a m f o r
instalation of SPD in
magnectic contactor
A1 and A2 are the terminals
of the contactor coil.
A1
A2
SPD
W i r i n g d i a g r a m f o r
instalation of SPD in line
with loads
For direct drive take in to
consideration the specified
maximum current.
LOAD
SPD
