10. GLOSSARY OF ACRONYMS
-
°C:
Temperature in Celsius degrees.
-
°F:
Temperature in Fahrenheit degrees.
-
Heat.:
Heating.
-
LOC:
Blocked.
-
No:
No.
-
OFF:
Turned off/disabled.
-
ON:
Turned on, enabled.
-
Refr:
Refrigeration.
-
SET (as in "Setting")
(setting or configuration).
-
Vac:
Electrical voltage (volts) of alternating current.
-
Vdc:
Electrical voltage (volts) of direct current.
-
Yes:
Yes.
11. OPTIONAL ITEMS - Sold Separately
Ecase protective cover
It is recommended for the Evolution line, keeps water from entering the back part of the instrument. It
also protects the product when the installation site is washed.
ECASE PROTECTIVE COVER
Extended frame
It allows the installation of Evolution line controllers with sizes 76 x 34 x 77 mm in various situations,
since it does not require precision in the notch of the instrument fitting panel.
The frame integrates two switches of 10 Amperes that may be used to actuate interior light, air curtain,
fan, and others.
CONTROLLER
EXTENDED
FRAME
SWITCHES
9. SIGNALS
Error in sensor: Sensor disconnected or damaged.
[Err1]
[Atlo]
[Athi]
[iNib]
[ton,]
[toff]
[LOC,][On,,]
[LOC,][OFF,]
[OFF,]
[eCAL]
[pppp]
Low temperature alarm.
High temperature alarm.
Buzzer inhibited.
Functions lockdown.
Unlocking of functions.
Control functions off.
Contact Full Gauge Controls.
Reconfigure the values of the functions.
Cyclic time on.
Cyclic time off.
-
EasyProg
It is an accessory that has as its main function to store the parameters of the controllers. At any time, you
can load new parameters of a controller and download them on a production line (of the same
controller), for example.
It has three types of connections to load or unload the parameters:
version 2 or higher
-
Serial RS-485:
It connects via RS-485 network to the controller (only
for controllers that have RS-485).
- USB:
it can be connected to the computer via the USB port, using
Sitrad's Recipe Editor.
- Serial TTL:
The controller can be connected directly to
EasyProg
by the TTL Serial connection.
EASYPROG
12. ANNEXES - Reference Images
Image V
Image VI
Image VII
Y
X
PANEL
PANEL
LOCKS
CONTROLLER
CONTROLLER
VINYL
CONTROLLER
W
ARRANTY
- FULL
GAUGE CONTROLS
Products manufactured by Full Gauge Controls, as of May 2005, have a two (02) year
warranty, as of the date of the consigned sale, as stated on the invoice. They are guaranteed
against manufacturing defects that make them unsuitable or inadequate for their intended
use.
EXCEPTIONS TO WARRANTY
The Warranty does not cover expenses incurred for freight and/or insurance when sending
products with signs of defect or faulty functioning to an authorized provider of technical
support services. The following events are not covered either: natural wear and tear of parts;
external damage caused by falls or inadequate packaging of products.
LOSS OF WARRANTY
Products will automatically lose its warranty in the following cases:
- The instructions for assembly and use found in the technical description and installation
procedures in Standard IEC60364 are not obeyed;
- The product is submitted to conditions beyond the limits specified in its technical
description;
- The product is violated or repaired by any person not a member of the technical team of
Full Gauge Controls;
- Damage has been caused by a fall, blow and/or impact, infiltration of water, overload
and/or atmospheric discharge.
USE OF WARRANTY
To make use of the warranty, customers must send the properly packaged product to Full
Gauge Controls together with the invoice or receipt for the corresponding purchase. As
much information as possible in relation to the issue detected must be sent to facilitate
analysis, testing and execution of the service.
These procedures and any maintenance of the product may only be provided by Full
Gauge Controls Technical Support services in the company's headquarters at Rua Júlio de
Castilhos, 250 - CEP 92120-030 - Canoas - Rio Grande do Sul – Brasil
ENVIRONMENTAL INFORMATION
Packaging:
The materials used in the packaging of Full Gauge products are 100% recyclable. Try to
perform disposal through specialized recyclers.
Product:
The components used in Full Gauge controllers can be recycled and reused if
disassembled by specialized companies.
Disposal:
Do not incinerate or dispose the controllers that have reached the end of their service as
household garbage. Observe the laws in your area regarding disposal of electronic
waste. If in doubt, please contact Full Gauge Controls.
Rev. 03
Copyright 2016
F27 - Control functions shutdown:
Enables control functions shutdown (refer to item 8.3.3).
[,,,0]
-Disables control functions shutdown.
[,,,1]
-Enables activation/deactivation of the control functions only if the functions are unlocked.
[,,,2]
-Enables activation/deactivation of the control functions even if the functions are locked.
