14. SIGNALING
Connection error.
No instruments registered in the scan list.
[Ecnn]
[none]
15.1 Ecase
It is recommended for the Evolution line, keeps water from entering the back part of the instrument. It also
protects the product when the installation site is washed.
15.2 Extended frame
It allows the installation of Evolution line controllers with sizes 76 x 34 x 77 mm in various situations,since it
does not require precision in the notch of the instrument fitting panel. The frame integrates two switches of
10 Amperes that may be used to actuate interior light, air curtain, fan, and others.
15. OPTIONAL ITEMS - Sold Separately
W
ARRANTY - FULL
GAUGE CONTROLS
Products manufactured by Full Gauge Controls, as of May 2005, have a two (02) year
warranty, as of the date of the consigned sale, as stated on the invoice. They are guaranteed
against manufacturing defects that make them unsuitable or inadequate for their intended
use.
EXCEPTIONS TO WARRANTY
The Warranty does not cover expenses incurred for freight and/or insurance when sending
products with signs of defect or faulty functioning to an authorized provider of technical
support services. The following events are not covered either: natural wear and tear of parts;
external damage caused by falls or inadequate packaging of products.
LOSS OF WARRANTY
Products will automatically lose its warranty in the following cases:
- The instructions for assembly and use found in the technical description and installation
procedures in Standard IEC60364 are not obeyed;
- The product is submitted to conditions beyond the limits specified in its technical
description;
- The product is violated or repaired by any person not a member of the technical team of
Full Gauge Controls;
- Damage has been caused by a fall, blow and/or impact, infiltration of water, overload
and/or atmospheric discharge.
USE OF WARRANTY
To make use of the warranty, customers must send the properly packaged product to Full
Gauge Controls together with the invoice or receipt for the corresponding purchase. As much
information as possible in relation to the issue detected must be sent to facilitate analysis,
testing and execution of the service.
These procedures and any maintenance of the product may only be provided by Full
Gauge Controls Technical Support services in the company's headquarters at Rua Júlio de
Castilhos, 250 - CEP 92120-030 - Canoas - Rio Grande do Sul – Brasil
ENVIRONMENTAL INFORMATION
Packaging:
The materials used in Full Gauge products' packaging are 100% recyclable. Dispose of
your waste preferably using specialized recycling agents.
Product:
The components used in Full Gauge controllers can be recycled and reused if
disassembled by a specialized company.
Disposal:
Do not burn or throw controllers in domestic garbage. Obey the laws in effect for your
area regarding the disposal of electronic waste. If in doubt, please contact Full Gauge
Controls.
EM DESENVOL
VIMENT
O
Inhibits the audible alarm.
Multi-FG not programmed.
[inib]
[pppC]
[ECal]
Please contact Full Gauge Controls.
13. ACCESS CODES
[,123]
Allows changing the advanced parameters in the menus
[Func]
and
[Cnfg]
.
[,231]
Allows choosing the units of pressure and temperature:
[=C-b]
Temperature in degrees Celsius and pressure in bar
[=C-p]
Temperature in degrees Celsius and pressure in psig
[=F-b]
Temperature in degrees Fahrenheit and pressure in bar
[=F-p]
Temperature in degrees Fahrenheit and pressure in psig
Rev. 03
Copyright 2015
