11
Depth of cut adjustment
1.
To adjust the blade (13) to the desired
cutting depth, loosen the wing nut (20)
and move the base plate (22) up or down
(fig. 6).
Note:
For best results, make sure to adjust the
depth of cut so that the blade protrudes
4-5 mm beyond the thickness of the material.
2.
At the desired depth of cut, secure the
base plate (22) by firmly tightening the
wing nut (20).
SET-UP & PREPARATION (cont.)
Fig. 6
Bevel angle adjustment
1.
To adjust the blade (13) to the desired
cutting angle, loosen the bevel bolt (15)
with the supplied wrench (14) and tilt the
base plate (22) to the desired angle as
shown on the bevel scale (fig. 7).
Note:
The angle of bevel is infinitely
adjustable between 0° and 45°.
2.
At the desired bevel angle, secure the
base plate (22) by firmly tightening the
bevel bolt (15).
45
30
15
Fig. 7
