Full Boar FBT-6000, Instruction Manual

Page: 12 / 18

12
OPERATION
Fig. 12
Tools can be connected directly to the dust extractor if
the tools power is less than 1850W. The dust extractor has
3 settings (On, Off and Automatic). The automatic setting
allows the dust extractor to turn on once the directly
connect power tool is turned on.
Switching on
1. Check whether the extractor hose (11) is tightly
connected to the vacuum extraction system and to the
extractor adaptor of the wood processing machine.
2. Check whether the debris bags (2, 6) are securely
fastened.
3. Switch on the vacuum extraction system by pressing the
on/off switch (15) into the on (“I”) position (Fig.16).
Switching off (Fig.16)
1. Switch off the vacuum extraction system by pressing the
on/off switch (15) into the off (“0”) position.
Switching into automatic mode
1. Switch the vacuum extraction system into automatic mode by pressing the on/off switch
(15) into the auto (“AUTO”) position (Fig.16).
2. Connect the power cable of your electric tool to the automatic socket-outlet (17) (Fig.17).
3. Connect the extractor hose (11) to the dust extractor connection of your electric tool.
Check that the connection is secure and air-tight.
4. As soon as you switch on the electric tool the extractor system will start up.
5. When you switch off the electric tool, the extractor system will switch off as well after a
pre-set delay.
AUT
O
AUT
O
Fig. 17
Fig. 16
WArNINg!
The power supply for this product should be protected by a residual current
device (rated at 30mA or less). A residual current device reduces the risk of electric shock.
15
15
17