Full Boar FBT-5000, Instruction Manual, Page: 15 / 20

15
Automatic mode (900W max.):
Connect the power cable on your electric
tool to the automatic power take off outlet
(4) and connect the suction hose (9) to the
extractor connector on your electric tool.
Check that the connections are secure and
airtight.
You can use the supplied hose step
down adaptor (22) to connect the suction
hose (9) to the electric tool. To do so,
fit it between the suction hose and the
extractor port on the electric tool.
Set the switch (7) on the wet and dry vacuum cleaner to
position II, automatic mode. The moment you switch on the
electric tool, the wet and dry vacuum cleaner switches on as
well. When you switch off the electric tool, the wet and dry
vacuum cleaner switches off as well after a preset delay.
Blowing
Connect the suction hose (9) to the blow connector (19) on
the wet and dry vacuum cleaner.
OPERATION (cont.)
Fig. 29
Fig. 30
Fig. 31