11
ASSEMBLY (cont).
Fig. 7
Foot Mounting Bracket
Parts required: Foot mounting bracket (8) and
M8 Foot mounting bracket fasteners x 2 (22)
1.
Align the holes in the foot mounting
bracket (8) with those in the base frame
(9) and secure in place using the two bolts
and nuts from the foot mounting bracket
fasteners (22). Using a 12mm spanner
securely tighten both nuts (fig. 7).
Hopper
Parts required: Hopper (4) and T-bolt x 2 (20).
1.
Place the hopper (4) in position on the
base frame (9) above the cutting blades
and slide it across so that the pins of the
frame engage the hinges on the hopper (4)
(fig. 8).
2.
Slide the mounting bracket on the
underside of the hopper (4) so that the two
holes align with those in the frame (fig. 9).
3.
Secure in place using two T-bolts and
washers (20). Firmly tighten by hand
turning clockwise (fig. 10).
Fig. 8
Fig. 9
Fig. 10
WARNING!
DO NOT place hands or any other body parts inside the cutter head
opening. DO NOT touch the blades with your hands or any other body parts.
