10
SET-UP & PREPARATION
Mounting and removing a diamond core drill bit
WARNING!
To reduce the risk of injury, turn power off and disconnect
the drill from the power source before installing and removing accessories,
before adjusting or changing set- ups or when making repairs. Be sure the
variable speed trigger (11) is in the off position. An accidental start-up can
cause injury.
This tool uses threaded core bits and adaptors which thread directly onto the
spindle (2).
1.
Choose the appropriate core bit for the size of the hole.
2.
Follow the core bit or manufacturer’s recommendations for mounting the bit. You
may require an adaptor to fit the bit onto the spindle. The thread of the bit or
adaptor must match the thread of the spindle (2).
3.
Smear the end thread with grease (not
included) (fig. 3).
4.
Hold the spindle (2) using a wrench (not
included) over the spindle flats and tighten
the core bit with a second wrench (fig. 4).
Fig. 3
Fig. 4
