10
KNOW YOUR PRODUCT
Fitting the wheels (15):
Each of the wheels has a different shaped bracket. You will need to identify each
before fitting into the underside of the vacuum.
1.
Align the correct shaped bracket with its corresponding mounting on the
underside of the vacuum. Push the wheels (15) firmly into the mounting until
they engage with a clicking noise (fig. 1).
2.
Secure each in position with the four supplied screws (22) (fig. 2)
ASSEMBLY
Fig. 2
WARNING!
During assembly ensure the cyclonic wet and dry vac is switched OFF
and disconnected from the power supply.
Fig. 1
Fitting the castors (8):
1.
Fit the castors (8) into the appropriate
mountings on the underside of the
vacuum. Push the castors (8) firmly into the
mounting until they engage with a clicking
noise (fig. 3).
Fig. 3
