Installation Instructions subject to change without notice.
Page 4 of 7
INS-FHEZ, Rev A
HotSpot EZ Exit
5. Unbox your EZ EXIT luminaire and remove your 2’
or 4’ fixture and place it in the ceiling where the
grid piece was removed, or the new fixture is to be
installed. Line up the L bracket at the end of the EZ
Exit luminaire with the tab of the opposite grid. See
photos below.
6.
Use the two of the provided short tek screws to
secure the luminaire to the grid by using one screw
on each side
Fulham Co. Inc.
: 12705 South Van Ness Ave., Hawthorne, CA 90250
Telephone
: 1-323-779-2980
Fax
: 1-323-754-9060
www.fulham.com
11/09/18
