Fulgor Milano FWC 8746 U TC X, Manual, Page: 35 / 48

EN
11
5 - OPERATING THE WINE COOLER
INTERIOR LIGHTING ON/OFF CONTROL
• Under the unlocked condition, touch the lighting mark
to turn on (or turn off ) the interior cool LED lighting.
• The lighting will stay on unstil it is manually turned off .
TEMPERATURE DISPLAY WINDOW
• The temperature is displayed in digital which is the best
way to be read out. The digital is shown as the set
temperature when you are setting the temperature, and
it will change to be the real temperature of the inside
cabinet after 10 seconds without being touched.
• When the temperature probe is out of order, the display
window will show with “HH” or “LL” instead of a digital
figure while continuous buzz sound will be heard. In case
of this happens, this appliance is considerately designed
to keep periodical running of compressor and fans which
helps to keep the coldness of the inside cabinet to protect
your stored wines.
WARNING
To avoid destroying your stored wines, it is strongly recommended
to have the appliance repaired immediately, as the spare periodical
running can not ensure the appliance to achieve the temperature
you have set.
TEMPERATURE RANGE SETTING
• The default temperature setting ranges are E: 5-12 ºC
(41-54 ºF) for the upper zone and 12-22 ºC (54-72 ºF)
for the bottom zone.
• To set a temperature range as desired, pls.make sure the
control panel is under locked condition.
• Press the mark for 3 seconds, the display windows will
flash “E”--”F”--”H”--”L” in loop with a sound of beep by
every pressing.
• Leave the display windows flashing for 3 seconds with a
sound of beep to confirm the setting.
Display
Temp.Range (Dual Zone)
Upper Zone Lower Zone
E (Default) 5 - 12 °C (41ºF-54ºF) 12 - 22 °C (54ºF-72ºF)
FF 2 - 12 °C (36ºF-54ºF) 12 - 20 °C (54ºF-68ºF)
H 5 - 12°C (41ºF-54ºF) 8 - 19 °C (46ºF-66ºF)
L 2 - 10 °C (36ºF-50ºF) 12 - 22 °C (54ºF-72ºF)
TEMPERATURE SETTING
• The default temperature setting ranges are E: 5-12 ºC (41-
54 ºF) for the upper zone and 12-22 ºC (54-72 ºF) for the
bottom zone.
• You need to select the set zone by touching the mark
before touching the mark or to set the desired
temperature. The zone temperature will flash when it is
ready to be set.
• The first touch on mark or will recall the previous
set temperature displayed in the digital window.
• Touch the mark to increase the set temperature by
1ºC (or by 1ºF). On the contrary, touch the mark to
decrease the set temperature by 1ºC (or by 1ºF).
• The digital will change to display the real temperature of
the inside cabinet after 10 seconds without being touched.
Note:
For the first time to use the appliance or to restart the
appliance after having been shut off for a long time, you may
find a few degrees variance between the set temperature
and the displayed temperature. It will be normal after a few
hours running
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC)
DISPLAY
Directly touch the mark , you can interchange the
Fahrenheit and Celsius display for both zones at the same
time.
Silent Mode
- Silent Mode is available for this appliance, which will slow
down the fans speed when the inside temperature reaches
the temperature set. But it is not suggested to use the function
if the ambient temp. higher than 25 °C in case cooling systom
is damaged due to low cooling power.
- The Silent Mode is set as “Off” by default, to
turn on it, when the control panel is under locked
condition, press and hold the light mark for
3 seconds, the icon ºC or ºF will flash every 2
seconds continuously to indicate the Silent Model
is working.
- To turn off it, when the control panel is under
locked condition, press and hold the light mark
for 3 seconds, the icon ºC or ºF will stop
flashing to indicate the Silent Model is off.