Specifications
Specifications
Model: RXP-4
Printing:
- Speed - 0.8 lines per second
- Characters - 40 characters per line
Transmission parameters:
- Speed - 9600 baud
- Format - 8 bits without parity
Paper:
- Type - Thermal Paper
- Size - 4.3” W
Dimensions:
- Size - 6.5 W x 5.5D x 2.0H inches
(165 x 140 x 50 mm)
- Weight - 1.0 pounds (0.45 Kg)
Operating conditions:
- Temperature - 41F to 95F (5C to
35C)
- Humidity 10 to 80%
Interface:
- RC232C DIN 6
Power supply:
- 120VAC, 60Hz 50W
Cautionary notes and precautions
Cautionary notes and precautions
WARNING:
- Shut OFF the equipment immediately if it produces smoke, a
strange odor or unusual noise. Immediately unplug the
equipment and contact technical support.
- Never attempt to repair, disassemble or modify this product
yourself. Tampering with this product may result in injury and
cause more damage to the equipment.
- Be sure to use the specified power source.
- Do not allow foreign matter to fall into the equipment.
- If water or other liquid spills into this equipment, do not
continue to use it. Unplug the power cord immediately and
contact technical support.
CAUTION:
- Do not connect cables in ways other than those mentioned in
this manual.
- Be sure to set this equipment on a firm, stable, horizontal
surface. Product may break or cause injury if it falls.
- Do not use in locations subject to high humidity or dust levels.
- Do not place heavy objects on top of this product.
- Never stand on or lean on this product. Equipment may fall or
collapse, causing breakage and possible injury.
- To ensure safety, unplug this product before leaving it unused
for an extended period.
- Before moving the product, unplug it and unplug all cables
connected to it.
!
!
1
The printer's settings are pre-
configured for all TORBAL scales
and should always remain as shown
below.
SW1
SW1
SW1
SW1
SW1
SW1
SW1
SW1
OFF
ON
OFF
ON
ON
OFF
OFF
OFF
DIP Switch Settings
DIP Switch Settings
6
Fulcrum Inc.
23 Carol Street.
Clifton, NJ 07014
(973) 473-6900
(973) 777-8302
http://www.fulcruminc.net