9. Please note, in normal TRUE grade operation, the USER can change to
MANUAL, again by simply pressing and holding the green button for 3-5 secs.
Automatic Drift System (ADS) / often called a Bump sensor:
Operated via bottom, right-hand white button, showing a "picture of a tilted
instrument". nb. its not an option found on the Remote Control.
Once the FRE-208 is ON and rotating in the auto (self) levelled mode, the
automatic drift system can be activated. Press the button &
TILT
will be
displayed on the screen.
ADS is now active.
If the Laser is knocked or caught by a gust of wind for example, the laser
head will stop rotating and an audible alarm sound to warn the User of the
problem.
Check all is OK, press the ADS button again & the laser will reset back to
AUTO level.
IMPORTANT NOTE: The ADS function cannot be set when Grading.
RADIO Remote Control & Laser Detector:
Radio Remote Control...
Fit the supplied 2pc x AA alkaline batteries, taking care with correct polarity.
Switch ON. The LCD shows rotational speed, scan angle & battery life.
The Remote’s keypad can set the following functions:
1. Rotating speed in increments; slow for Indoors, fast (max) for Outdoors.
2. Scan angles & position around the room.
3. Auto / Manual (grade) setting via the red "G" button.
5
