6-17
Chapter 6 Admit/Discharge
Bed Transfer and Bed Exchange
Bed Transfer and Bed Exchange
By using the bed transfer/exchange function, patient information and monitoring data can be transferred/exchanged
between beds.
The bed transfer/exchange operation can be performed under the "Function" menu of the Central Monitor Display.
(
"Bed Transfer/Bed Exchange" P13-10)
By performing central monitor communication setup, transfer/exchange of patient information and alarm settings
among several central monitors can be performed through the TCP/IP network.
NOTE
The review data cannot be transferred/exchanged among the different central monitors.
The review data can be transferred/exchanged within the same central monitor.
The review data saved on the original central monitor can be viewed via TCP/IP network.
(
"Review Data Display for Transferring Patient" P9-18)
The bed transfer is possible between the central monitors of the same model type. The bed
transfer/exchange with other central monitor is not possible.
Discharge
The patient information, monitoring data, monitoring condition will be cleared to prepare for monitoring the next
patient.The following data will be cleared after the discharge procedure.
Patient information entered during the admit procedure (patient name, pacemaker used/not used, etc.)
Patient monitoring data (trend data, recall waveform, etc.)
Setup data changed during monitoring
CAUTION
Depending on the bedside monitor type and software version, discharge procedure for the
TCON bed can not be performed on the central monitor. The discharge operation on the
bedside monitor and central monitor will be independent. For details of the bedside monitor
type and software version, refer to your nearest service representative.
When a EMR link function is used, the discharge operation cannot be performed.
NOTE
The alarm limit will be initialized to the value set under [Menu] > "Initial Settings" > [Admit]
("User I/F") > [Alarm].
(
Maintenance Manual "Admit" P7-16)
Bed Transfer: The setup data of the original bed will be overwritten to the setup data of the new bed.
The original bed will be treated as discharged bed, monitoring data will be cleared and setup data will be
initialized.
Bed Exchange: The setup data of the original bed and the new bed will be exchanged.
Summary of Contents for DYASCOPE 8000 Series
