Fukuda Denshi LX-7230, Operation Manual

Page: 11 / 112

Precautions about Output Signal
WARNING
Do not use the output signal of the monitor that receives radio wave signal
from the LX-7230 as the trigger signal for IABP, MRI echocardiographic, or
defibrillator for the following reasons.
 It may lead to a delay of operating timing due to the delay time of
waveform transmission.
 A trigger signal unrelated to the heart rate may be generated due to
the interfusion of spike noise at weak electric field.
Precautions about Accessories and Optional Accessories
WARNING
Use only the accessories, such as ECG Lead cable and SpO
2
probe
(sensor)/ relay cable, specified by Fukuda Denshi for the LX-7230.
Otherwise, the LX-7230 cannot deliver its maximum performance and may
be damaged, resulting in a safety hazard.
CAUTION
 Do not reuse disposable products.
 Store the disposable products properly as mentioned in their user
manuals.
Precautions about Battery
WARNING
 Use new "AA" size (“LR06” size) alkaline cell.
 Install the battery with the correct polarity.

Do not charge the battery. Any attempt to charge the battery may cause
it to leak or break.
 Do not short the (+) and (-) terminals. It may result in exothermic heat
and fire.
 Do not throw the battery into fire. It may explode.
ix