Fukuda Denshi Dynascope 8000 Series, Maintenance Manual

Page: 87 / 154

5-1
Chapter 5 Initial Settings Initial Settings
Chapter 5 Initial Settings
Initial Settings
This section explains about the "Initial Settings" menu.
Under "Initial Settings" menu, there are 7 setup categories which are Alarm, Measurement, User I/F, External
Device, System, User Mode Registration, and Administrator Setup.
Description for Each Category
Category Subcategory Description
Alarm - Alarm-related settings, alarm indicator settings, etc.
Measurement User Label User label settings for BP and TEMP
Unit Measurement unit settings for CO
2
, BP, ST
Other Other settings such as arrhythmia analysis filter, etc.
User I/F Display/Print Display and print settings such as date format, BP alarm limit
increment, etc.
Power ON/ Discharge Settings such as backup status at "Power ON" and "Discharge", etc.
Shortcut Menu Key display settings for shortcut menu
Key Mask Key mask settings for unnecessary keys
Operation Settings for hiding the window or user key
Quick Menu Key display settings for quick menu
External Device Analog Output Settings for analog waveform output, synchronized signal output
Magnetic Card Reader Settings for magnetic card reader
AC Unit Settings for external device connectors such as serial connector and
Status II connector
Network Network settings for laser printer
Status Output Alarm Output Setup
System DS-LAN Wired network settings such as Room ID, Bed ID.
Telemeter Telemetry settings such as telemetry channel, transmitting waveform,
etc.
Other Settings for AC filter, search patient ID, etc.
User Mode
Registration
- Settings for monitor mode, display mode according to the monitoring
purpose
Administrator
Setup
Key Lock Settings of key lock level for display and setting
Password Setup Settings for password and administrator