Fujitsu U9310X Operating Manual Download | Manualshive

Page: 24 / 99

background image

Working with the notebook

Indicator

Description

Power-on indicator/Standby

Standbyindicator

Power-onindicator

•

Indicator is illuminated: The notebook is switched on.

•

The indicator

fl

ashes: The notebook is in sleep mode (Save-to-RAM).

•

The indicator is not lit: The notebook is switched off or the notebook is in
Save-to-Disk mode.

Battery status indicator/power connector

The state of charge of the battery is shown by the battery indicator.

With mains adapter connected:

•

The indicator lights up orange: the mains adapter is connected and the battery
is being charged.

•

The indicator lights up red: The mains adapter is not connected and the battery
power is below 20%.

•

Indicator

fl

ashes orange: the mains adapter is connected but the battery cannot

be charged as the battery is too hot or cold for charging. The charging process
is continued as soon as the battery reaches a permissible temperature again.

•

Indicator

fl

ashes red: An error has occured.

•

Indicator not lit: The battery is not being charged (the battery is already more
than 90% charged or the mains adapter is not connected and the battery
power is above 20%).

Batterystatusindicator

Batterysymbol

Batteryindicator

F

F Lock indicator

Indicator

FLock

The indicator lights up: The key combination

Fn

+

F

has been pressed.

The special functions of the Fn (function) keys (see section

"Key combinations",

) can be executed by pressing the keys directly, without having to press

the

Fn

key.

Num Lock indicator

Indicator

NumLock

Indicator is illuminated: The

Num

key has been pressed. The virtual numerical

keypad is activated. You can output the characters indicated on the upper right of
the keys.

Caps Lock indicator

Indicator

CapsLock

Indicator is illuminated: The Caps Lock key has been pressed. All the characters
you type will appear in upper case. In the case of overlay keys, the character
printed on the upper left of the key will appear when that key is pressed.

Scroll Lock indicator

Indicator

ScrollLock

Indicator is illuminated: the key combination

Fn

+

Scr

has been pressed. The

effect that this key has varies between applications.

20

Fujitsu

«
...
22
23
24
25
26
...
»

Summary of Contents for U9310X




































































































Reviews:

No comments

Related manuals for U9310X

Brand: IBM Pages: 108

Brand: IBM Pages: 94

Brand: IBM Pages: 96

Brand: IBM Pages: 98

Brand: XPG Pages: 46

Brand: EUROCOM Pages: 104

Brand: Fujitsu Siemens Computers Pages: 3

Brand: Lenovo Pages: 56

Brand: Lenovo Pages: 96

Brand: Lenovo Pages: 12

Brand: Lenovo Pages: 4

Brand: Lenovo Pages: 64

Brand: Lenovo Pages: 154

Brand: Lenovo Pages: 240

Brand: Lenovo Pages: 4

Brand: Lenovo Pages: 4

Brand: Lenovo Pages: 44

Brand: Lenovo Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands