First-time setup of your device
Switching on the device for the first time
Switchingon forthe
fi
rsttime
When you switch on the device for the
fi
rst time, the supplied software is
installed and con
fi
gured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your device for the
fi
rst time, the operating system
is pre-installed on the hard disk.
1
2
►
Press the ON/OFF button (1) for about one second to switch the device on.
The power-on indicator (2) lights up whenever the system is switched on.
►
During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will
fi
nd more
information on the system and drivers, help programmes, updates, manuals etc. on
the device or on the Internet under
"http://www.fujitsu.com/fts/support/"
.
You can
fi
nd information and help on the Windows operating system functions
on the Internet at
"http://windows.microsoft.com"
18
Fujitsu
