Fujitsu Stylistic ST6010, User Manual

Page: 30 / 139

29 - Status Display
Table 1. System Status Indicators
HDD Access • On State (or
flashing)
• Idle Mode
Green Displayed when hard disk drive is accessed.
• Sleep
• Hibernate
• Off State
Off Hard disk drive is not being accessed.
Security • On State Green, continuous
(until password is
entered) The Security Indicator lights (if a password was set)
when the system resumes from Off or Sleep modes. You
must enter the password that was set in the Security
Panel before your system will resume operation. See
“Security Functions of Application Buttons” on page 36.
Power • On State
• Idle Mode
Green, continuous The system is powered on and ready for use.
• Sleep Green, blinking The system has suspended and saved active settings to
RAM.
• Off State
• Hibernate
Off The system has suspended and saved settings and data
to the hard disk drive.
In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on,
five seconds off.
Icon Mode/State LED State Remarks