Fujitsu stylistic q616 Operating Manual Download Page 21

Page: 21 / 111

Important notes

Cleaning with disinfectant wipes

There are many ways of disinfecting surfaces. The following disinfectant wipes
have been tested successfully with the Tablet PC:

•

MG Chemicals Multipurpose Alcohol Wipes (alcohol-based)

•

PROSAT® Sterile™ PS-911EB/EtOH Life Sciences Wipes (alcohol-based)

•

Clorox® Healthcare Bleach Germicidal Wipes (without alcohol)

Remember, if your Tablet PC is con

gured with the Smart Card shell, it does not

have a cover to close the port and liquid could enter and damage the device. Take
extra precautions when cleaning around the Smart Card reader.

For proper use of disinfectant wipes, please read the manufacturer’s instructions.

Before cleaning, please test the disinfectant wipe on a small area of the Tablet
PC. Some medical disinfectant wipes may leave residue on the Tablet PC which
is dif

cult to remove again, or they may dry out quickly. Therefore dispose of

the wipes after one single use and do not reuse them.

Fujitsu

Summary of Contents for stylistic q616
















































































































Search results

Summary of Contents for stylistic q616

Reviews:

Related manuals for stylistic q616

Brands by name

Popular brands

Fujitsu stylistic q616, Operating Manual

Search results

Summary of Contents for stylistic q616

Reviews:

Related manuals for stylistic q616

Brands by name

Popular brands