Fujitsu STYLISTIC Q507 Operating Manual Download Page 20

Page: 20 / 104

If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.

Before switching it on for the

rst time, connect the device to the AC voltage using

the AC adapter, see

"Connecting the AC adapter", Page 19

. The AC adapter must

remain connected during the whole of the installation process.

A system test is performed when your device is

rst switched on. Various messages

can appear. The display may remain dark for a short time or may

icker.

Please follow the instructions on the screen.

NEVER switch off your device during the

rst-time setup process.

The battery must be charged if you want to operate your device using the battery.

When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.

For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet
PC, please refer to the operating manual for your device.

Unpacking and checking the device

If you

nd that damage has occurred during transport, please notify

your local sales outlet immediately!

►

Unpack all the individual parts.

Packaging

Transport

►

Check your device for any visible damage which may have occurred during transportation.

You may need to reuse the packaging in the future, for example if
you need to ship your device.

Fujitsu

Summary of Contents for STYLISTIC Q507









































































































Search results

Summary of Contents for STYLISTIC Q507

Reviews:

Related manuals for STYLISTIC Q507

Brands by name

Popular brands

Fujitsu STYLISTIC Q507, Operating Manual

Search results

Summary of Contents for STYLISTIC Q507

Reviews:

Related manuals for STYLISTIC Q507

Brands by name

Popular brands