background image

4

S t y l i s t i c   S T 5 0 0 0   S e r i e s   T a b l e t   P C   U s e r ’ s   G u i d e   –   S e c t i o n   O n e

Figure 1-3. Stylistic ST5000 Series Tablet PC Features (Back View)

* The system is configured with one of two modules: a standard modem/LAN module or an optional wireless LAN/LAN/

modem combo module. 

Back Features:

1

System interface connector:

 Allows you to connect 

the optional Stylistic Tablet Dock.

 

Removable battery: 

Can be removed and replaced 

with a charged battery.

 

Battery release latch:

 Used to release the removable 

battery.

Tablet Dock latch point: 

Allows you to attach the 

system to an optional Tablet Dock.

 

Memory module cover

: Removable cover over the 

memory modules.

Thermal Suede:

 Several areas of the system back are 

covered with “thermal suede”. This material should 

not

 be removed. It is designed to minimize the heat 

that the user feels when the system has been 
operating for an extended period of time.

Wireless LAN module cover

: Provides protection for 

the optional wireless LAN radio.

• Wireless LAN On/Off switch:

 For systems with the 

optional wireless LAN radio, this switch toggles the 
radio on or off, allowing the user to maximize battery 
life when wireless LAN functionality is not needed.

These peripherals and accessories are sold separately.

Battery 

Memory

Battery

System

Release
Latch

Module
Cover

Interface
Connector

Tablet Dock
Latch Points

Thermal Suede

Wireless LAN*

On/Off Switch

Ocampa2_UG.book  Page 4  Thursday, February 19, 2004  5:23 PM

Summary of Contents for Stylistic 5010



















































































Reviews: