Fujitsu Stylistic 2300, Technical Reference Manual

Page: 37 / 140

BIOS Setup 3-17
Power Savings Options Submenu (Accessed Through The Power Savings Menu)
Options for the Power Savings Options submenu are described in Table 3-10.
Table 3-10. BIOS Setup Power Savings Options Submenu
Option Settings Description
Suspend Mode Suspend To RAM
Suspend To Disk Determines the suspend mode used when you press
the Suspend/Resume button or when the Suspend
Mode Timeout expires.
Selecting Suspend To RAM also allows you to
configure the Suspend-To-Disk Timeout option.
Note: You must choose Suspend To Ram to use the
Resume On Modem Ring and Resume On Time
options.
Suspend-To-Disk Timeout Off
After 1 Hour Determines whether the system automatically
performs a suspend-to-disk operation after 1 hour in
suspend-to-RAM mode.
To use this feature, the Suspend Mode option must
be set to Suspend To RAM.
Resume On Modem Ring Off
On Select On to configure the system to resume
operation when an incoming call is detected by your
modem.
This feature will detect a modem ring on the optional
built-in modem, a modem installed in a PC Card slot,
or an external modem connected to a serial port;
however, implementation of the ring indicator
function differs between modem vendors, so this
feature may not be supported by some third-party
modems.
To use this feature, the Suspend Mode option must
be set to Suspend To RAM.
Resume On Time Off
On Select On to configure your system to resume
operation at the time of day specified in the Resume
Time field.
To use this feature, the Suspend Mode option must
be set to Suspend To RAM.
Resume Time XX:XX:XX Determines time of day system will resume when the
Resume On Time option is On. Enter the time of day
in HH:MM:SS format. Note that the system uses a
24-hour clock.
Microsoft Corp. Exhibit 1020