Fujitsu Stylistic 2300, Technical Reference Manual

Page: 83 / 140

System Interface Port 6-9
The port replicator connector is not a “hot pluggable” connector. You must shut down or suspend the pen
tablet before connecting the port replicator. The system interface port is disabled (all signals de-asserted)
when system operation is suspended.
Table 6-9 System Interface Port Connector Pin Assignments
Pin
Signal
Name
Level Description Port or Connector
1 GNDPR GND Ground Port Replicator
2 GNDPR GND Ground Port Replicator
3 LOUTLG GND Ground Left Line Output Audio Jack
4 GNDPR GND Ground Port Replicator
5 LOUTL Analog Signal Left Line Output Audio Jack
6 GNDPR GND Ground Port Replicator
7 LOUTRG GND Ground Right Line Output Audio Jack
8 5VMAIN +5 V +5 Volt Power Output Port Replicator
9 LOUTR Analog Signal Right Line Output Audio Jack
10 5VMAIN +5 V +5 Volt Power Output Port Replicator
11 LINLG GND Ground Left Line Input Audio Jack
12 5VMAIN +5 V +5 Volt Power Output Keyboard Port
13 LINL Analog Signal Left Line Input Audio Jack
14 5VMAIN +5 V +5 Volt Power Output Mouse Port
15 LINRG GND Ground Right Line Input Audio Jack
16 PRHPLG GND Ground Left Headphone Audio Jack
17 LINR Analog Signal Right Line Input Audio Jack
18 PRHPL Analog Signal Left Headphone Audio Jack
19 MICAMPRG GND Ground Right Mic Input Audio Jack
20 PRHPRG GND Ground Right Headphone Audio Jack
21 MICAMPR GND Signal Right Mic Input Audio Jack
22 PRHPR GND Signal Right Headphone Audio Jack
23 MICAMPLG GND Ground Left Mic Input Audio Jack
24 GND AUD GND Ground Port Replicator (Audio Amp)
25 MICAMPL GND Signal Left Mic Input Audio Jack
26 PSTB# +5 V Strobe Parallel Port
27 PAFD# +5 V Auto Feed Parallel Port
28 PRD0 +5 V Data Bit 0 Parallel Port
29 PPERR# +5 V Error Parallel Port
30 PRD1 +5 V Data Bit 1 Parallel Port
Microsoft Corp. Exhibit 1020