Fujitsu SPARC M10-4, Service Manual

Page: 490 / 514

Table B-9 Specifications of the internal disk drive (SPARC M10-4/M10-4S) (continued)
Item Description
Type of maintenance Active/hot, active/hot (using DR), inactive/hot, and system-
stopped
Maintenance category Replacement, expansion, and reduction
Table B-10 Specifications of PCIe card (SPARC M10-4/M10-4S)
Item Description
Maximum number of
PCIe cards
11 (*)
Location Rear of chassis
Type of maintenance Active/hot (using PHP), active/hot (using DR), inactive/hot, and
system-stopped
Maintenance category Replacement, expansion, and reduction
*: Can be mounted only on a SPARC M10-4.
Table B-11 Specifications of XSCF interface unit (crossbar box)
Item Description
Number of XSCF interface
units
1
For the maintenance procedure, see " Chapter 12 Maintaining the Internal Disks ."
B.7 PCI Express Card
Up to eight PCIe cards can be mounted in a SPARC M10-4S with a crossbar unit
mounted. For a SPARC M10-4 with no crossbar unit mounted, up to 11 PCIe cards
can be mounted.
Table B-10 lists the specifications of the PCIe card.
For the maintenance procedure, see " Chapter 13 Maintaining the PCI Express Cards ."
B.8 XSCF Interface Unit
The XSCF interface unit of the crossbar box mounts the identification information.
The XSCF interface unit and each of the other units are connected by the crossbar
backplane unit.
Table B-11 lists the specifications of the XSCF interface unit of the crossbar box.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
February 2014 466