Fujitsu SPARC M10-4, Service Manual

Page: 201 / 514

Table 8-3 Memory mounting configurations (CMUL and expanded CMUU)
Number of
memory
modules
Mounted memory
8 a in
Figure 8-3
-
16 a in
Figure 8-3
b in
Figure 8-3
- - - - - -
24 a in
Figure 8-3
b in
Figure 8-3
e in
Figure 8-3
- - - - -
32 a in
Figure 8-3
b in
Figure 8-3
e in
Figure 8-3
f in Figure
8-3
- - - -
40 a in
Figure 8-3
b in
Figure 8-3
e in
Figure 8-3
f in Figure
8-3
c in
Figure 8-3
- - -
48 a in
Figure 8-3
b in
Figure 8-3
e in
Figure 8-3
f in Figure
8-3
c in
Figure 8-3
d in
Figure 8-3
- -
56 a in
Figure 8-3
b in
Figure 8-3
e in
Figure 8-3
f in Figure
8-3
c in
Figure 8-3
d in
Figure 8-3
g in
Figure 8-3
-
64 a in
Figure 8-3
b in
Figure 8-3
e in
Figure 8-3
f in Figure
8-3
c in
Figure 8-3
d in
Figure 8-3
g in
Figure 8-3
h in
Figure 8-3
XSCF> showhardconf
------------------------
Ommitted
------------------------
MBU Status:Normal; Ver:2086h; Serial:TZ1249M00C ;
+ FRU-Part-Number:CA07363-D001 A0 /7060744 ;
+ Power_Supply_System: ;
+ Memory_Size:64 GB; Type: A ;
CPU#0 Status:Normal; Ver:4142h; Serial:00325040;
+ Freq:2.800 GHz; Type:0x10;
+ Core:16; Strand:2;
MEM#00A Status:Normal;
+ Code:2c800118KSF1G72PZ-1G6E1 4531-B1F92ED5;
+ Type:04; Size:8 GB;
MEM#01A Status:Normal;
Install it by observing the mounting configurations shown in either Table 8-3 or Table
8-2 .
8.2.2 Checking memory information
Check the type and size of the memory by using the showhardconf command of the
XSCF firmware.
1.
Log in to the XSCF shell.
2.
Execute the showhardconf command to check the memory information.
The capacity and rank of the memory are displayed.
Chapter 8 Maintaining the Memory 177