Fujitsu SPARC Enterprise T5140, Installation Manual

Page: 73 / 130

Powering On the System 51
▼
To Log Into the Service Processor Using the
Serial Management Port
After the service processor boots, access the ILOM CLI to configure and manage the
system. The ILOM CLI prompt (
->
) is displayed at the first time the service processor
is booted. The default configuration provides an ILOM CLI
root
user account. The
default
root
password is
changeme
. Change the password using the service
processor ILOM CLI
password
command.
1. If this is the first time the system has been powered on, use the
password
command to change the
root
password.
Note –
After the
root
password has been set, on subsequent reboots, the ILOM CLI
login prompt is displayed.
2. Enter
root
for the login name followed by your password.
...
Starting OpenBSD Secure Shell server: sshd.
Starting Servicetags listener: stlistener.
Starting FRU update program: frutool.
hostname
login: root
Password: changeme
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
...
Federal Acquisitions: Commercial Software -- Government Users
Subject to Standard License Terms and Conditions.
...
Warning: password is set to factory default.
-> set /SP/users/root password
Enter new password: ********
Enter new password again: ********
->
...
hostname
login: root
Password:
password
(
nothing displayed
)
Waiting for daemons to initialize...